These are the Support Forums for FSUIPC and related products.
These forums replace the old support forums which have been running for 20+ years. The old forums contain a wealth of information on all FSUIPC products, but are now no longer available.
Please note that you will need to Register and Login to post for support, and also to download attachments. You can view these forums without registering.
Support is also available via Discord. Please use the following invite link to join the FSUIPC Discord server:
https://discord.gg/zjwUTrxmmE
FSUIPC7 Issue Fenix
With my Fenix airbuses suddenly it sets idle at 50%. When I calibrate it in FSUIPC the movements are full. When I go to calibrate it in the sim it won't go to idle. It will only go to 50% at the lowest. Tried many fixes but had to settle with setting it up through MSFS2020. All other aircraft work fine. Any thoughts on what possibly causing this? I prefer using FSUIPC as I have forever.
Thanks
Posted by: @irishcurseWhen I calibrate it in FSUIPC the movements are full. When I go to calibrate it in the sim it won't go to idle. It will only go to 50% at the lowest.
Sorry, but I am confused about this - why are you calibrating in MSFS if assigned and calibrated in FSUIPC? How have you assigned your throttle axis? For the Fenix I think you need to assign using 'Send to FS as normal axis' and use THROTTLE1_AXIS_SET_EX1 / THROTTLE2_AXIS_SET_EX1 and not calibrate. For many/most complex aircraft, you can only calibrate the throttle when assigned using 'Send direct to FSUIPC calibration', but that is often not possible if a different throttle control is needed.
Alternatively, look for any input events that control the throttle - if there are any available, it may be better to use those. Otherwise, I think throttle control is also possible using lvars. But I don't have the Fenix so cannot look into this for you - but can help if you want to explore this option.
The following post shows how to set-up reverse thrust on the fenix - maybe it will help with forward thrust:
That post also indicates that the lvars A_FC_THROTTLE_LEFT_INPUT and A_FC_THROTTLE_RIGHT_INPUT can be used to control the throttle. You could try using these, either via a preset or a lua script. See the following article on how to control an lvar using an axis:
Ok ill try this. When i do it through FSUIPC the FSUICPC shows full range of motion but when I get into the sim(with fenix that has always worked) it stops at 50% for idle which is wrong. I dont usually assign through the sim but its the only way at the moment.
Posted by: @irishcurseWhen i do it through FSUIPC the FSUICPC shows full range of motion but when I get into the sim(with fenix that has always worked) it stops at 50% for idle which is wrong.
Ok - it was just confusing when you say '...go to calibrate in the sim', but I presume you just mean when you move the throttle which is assigned and calibrated in FSUIPC. If you have assigned with 'Send to FS as normal axis' and have also calibrated in FSUIPC, then this can cause issues. First try removing the calibration. If you cannot get the required movement with this, then check if any Input Events are available for the throttle and try them if available, or if not then try using a preset to control the available lvars. I can help with the preset if you need assistance. Are you using a reverse zone on the throttle axis or not?
Anyway, let me know how it goes.
