These are the Support Forums for FSUIPC and related products.
These forums replace the old support forums which have been running for 20+ years. The old forums contain a wealth of information on all FSUIPC products, but are now no longer available.
Please note that you will need to Register and Login to post for support, and also to download attachments. You can view these forums without registering.
Support is also available via Discord. Please use the following invite link to join the FSUIPC Discord server:
https://discord.gg/zjwUTrxmmE
Start from addons
Hello! I use the msfs2024.bat from fsuipc to start the flightsim2024.
After the start of msfs2024 and select free flight and airport and stand i think fsuipc start an the addon programs list at the "program" area of the fsuipc.ini file start too.
But nothing happend. The fsuipc main program is start (i see it at the tasklist) but nothing else.
I have attached the fsuipc.ini file (only one prgram for find the problem).
Best regards for help
peter
[Auto]
1=ipcReady
2=Lua peroVRAASoverlay
3=Lua ProSim-Simsounds
[Sounds]
Device1=Prim rer Soundtreiber
Device2=Cockpit (USB Audio Device)
Device3=TripleHead2Go (NVIDIA High Definition Audio)
Device4=Line 3 (Virtual Audio Cable)
Device5=Lautsprecher (Sonic Studio Virtual Mixer)
Device6=Line 1 (Virtual Audio Cable)
Device7=Line 2 (Virtual Audio Cable)
Device8=Headset CPT (2- ENDORFY Viro Plus)
Device9=Heatset-CPT (Jabra Link 380)
Device10=Kabine (2- USB Audio Device)
Device11=Buttkicker (USB PnP Audio Device)
Device12=5.1 Cockit (Sound Blaster Audigy Fx)
Device13=Realtek Digital Output (Realtek USB Audio)
Device14=C49HG9x (NVIDIA High Definition Audio)
Device15=Headphones FO (ENDORFY Viro Plus)
Device16=Headset FO (ENDORFY Viro Plus)
[General]
UpdatedByVersion=7507
PMDG737offsets=Auto
PMDG777offsets=Auto
UseSystemTime=No
JoystickTimeout=20
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
EnableExtraButtons=Yes
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=Yes
ClockSyncMins=5
ClearWeatherDynamics=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=None
ZapAirRange=1.50
ZapGroundRange=0.25
ZapCylinderAltDiff=0
ShortAircraftNameOk=Substring
UseProfiles=Yes
WideLuaGlobals=Yes
InvokeFSUIPCOptionsKey=70,12
AxesWrongRange=No
TCASid=Flight
TCASrange=40,3
AxisCalibration=No
DirectAxesToCalibs=No
AxisIntercepts=No
DontResetAxes=No
ThreadAffinityMask=x0
LuaAffinityMask=x0
GetNearestAirports=Yes
LogOptionProtect=Yes
AutoConnectToSim=Yes
AutoExitWithSim=Yes
TimeForLuaClosing=2
TrafficStallTime=2
NormalStallTime=2
LuaRerunDelay=66
ComReadLoopTime=10
ComWriteLoopTime=10
InitialStallTime=15
DetectToConnectDelayAuto=30
StartUpTuningDoneVersion=1
Window=1068,233,1668,763
Console=No
ConsoleWindowTopMost=No
ConsoleWindow=260,260,1253,779
LogCustom=xBF0
ControlsListBuild=122
StartUpTuningActive=Yes
FSVersionUsed="SunRise",12.2.282174.999
SimConnectUsed=12.2.0.0
[Traffic Limiter]
AirportPreference=50
PlannedAirportsPreference=50
GroundPreference=50
NearerPreference=50
TargetFrameRate=0
LoLimit=0
HiLimit=0
[JoyNames]
A=vJoy Device
A.GUID={89ECD3F0-5D9E-11EF-8002-444553540000}
I=<< MISSING JOYSTICK >> << MISSING JOYSTICK >>
L=<< MISSING JOYSTICK >> << MISSING JOYSTICK >>
B=vJoy Device
B.GUID={06EBFA60-496C-11F1-800A-444553540000}
0=vJoy Device
0.GUID={89ECD3F0-5D9E-11EF-8002-444553540000}
C=
C.GUID={89ECD3F0-5D9E-11EF-8002-444553540000}
[JoystickCalibration]
RudderBlendLowest=1
[Axes]
1=ipcReady
2=Lua peroVRAASoverlay
3=
PollInterval=10
RangeRepeatRate=10
[LuaFiles]
1=ipcReady
2=peroVRAASoverlay
3=ProSim-Simsounds
4=Positive_Rate
5=ProSim-Lvars
6=simsound
7=_Airspeed_alive
8=ProSim_Airstairs
[Buttons]
3=P64,0,Cx030078ED,x00000021 -{offset dword set, offset 78ED}-
4=P64,1,Cx030078ED,x00000022 -{offset dword set, offset 78ED}-
5=P64,2,Cx030078ED,x00000023 -{offset dword set, offset 78ED}-
6=P64,3,Cx030078ED,x00000064 -{offset dword set, offset 78ED}-
7=P64,4,C65731,0 -{SLEW_ON}-
8=P64,5,C66389,1 -{TOGGLE_AIRCRAFT_EXIT}-
9=U64,4,C65730,0 -{SLEW_OFF}-
10=P64,6,C66389,4 -{TOGGLE_AIRCRAFT_EXIT}-
11=P64,7,C66389,6 -{TOGGLE_AIRCRAFT_EXIT}-
14=P64,8,C66483,2 -{TOGGLE_PUSHBACK}-
PollInterval=25
ButtonRepeat=20,10
15=H4002,0,K192,8 -{Key press: @key}-
16=U4002,0,K192,8 -{Key press: @key}-
17=R2001,0,K192,8 -{Key press: @key}-
18=U2001,0,K192,8 -{Key press: @key}-
19=PA,17,Cx030073C0,x00000002 -{offset dword set, offset 73C0}-
20=PA,18,Cx030073C0,x00000003 -{offset dword set, offset 73C0}-
21=PA,19,Cx030073C0,x00000004 -{offset dword set, offset 73C0}-
22=PA,16,Cx010073C0,x05 -{offset byte set, offset 73C0}-
23=PA,15,Cx030073C0,x00000006 -{offset dword set, offset 73C0}-
24=R4000,0,K123,10 -{Key press: lctl+F12}-
25=P5002,0,Cx010073C0,x05 -{offset byte set, offset 73C0}-
26=HA,31,K77,8 -{Key press: M}-
[GPSout]
GPSoutEnabled=No
[GPSout2]
GPSoutEnabled=No
[WideServer]
WideFSenabled=Yes
AdvertiseService=1
Port=8002
Port2=9002
[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No
[ClientNames]
1=FLUSI-OVERHEAD
2=FLUSI-FO
3=FLUSI-EFB-CPT
4=FLUSI-CPT
5=FLUSI-FMGS-MAIN
6=FLUSI-REGIE
7=DESKTOP-FKC45JI
8=FLUSI-OUTSIDE
[Programs]
Run1=Ready,Close,"D:\ProSimA320\ProSimA322-Audio2\ProsimAudio.v2.exe"
[Keys]
7=76,10,x07000000,x00000000 -{lctl+L: Press=offset dword setbits, offset 0000 }-
8=123,8,x030073C0,x00000001 -{F12: Press=offset dword set, offset 73C0 }-
9=186,8,x030073C0,x00000001 ;:key: Press=offset dword set, offset 73C0 }- -{;:key: Press=offset dword set, offset 73C0 }-
[WAPI]
LogLevel=Disable
EnableWAPI=Yes
[Monitor]
Monitor0=0,73C0,1,1
Monitor1=0,0BE4,0,1
Monitor2=0,0BE0,3,1
Display=13
[AutoSave24]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=NoPosted by: @pe_martinBut nothing happend. The fsuipc main program is start (i see it at the tasklist) but nothing else.
Sorry, but I do not understand What you mean or what your issue is. What do you mean by 'nothing happened'?
When FSUIPC starts, it sits in your system tray and you can access it from ther, or open the main window by using the (default) key command Alt+F. But you seem to already have some assignments, so I guess you know this...
Can you please explain your problem more clearly - and maybe this is a language/translation issue...
Also, please do not paste file contents. Always attach ini and log files, rather than copying and pasting the content.
Also please be aware that I am currently travelling/on holiday, and have limited time for support for the next 10 days or so, but I will monitor and respond when time and circumstances permit.
Hello!
At first many thanks for the reply.
I have the problem that the Program i have write at the fsuipc.ini File did Not start?
When did the programs start?
When i close fsuipc and start it again then the Programs from fsuipc.ini will start correct.
Thats the problem.
I know that you are at holiday at the moment and that you not repeat in realtime, all fine.#
Best regards
peter
There are many issues in that ini file - it cannot possibly be have been generated by FSUIPC and looks corrupted. e.g. look at the [Axes] section:
[Axes] 1=ipcReady 2=Lua peroVRAASoverlay 3= PollInterval=10 RangeRepeatRate=10
That just doesn't make any sense and cannot possibly have been generated by FSUIPC.
I suggest that you delete/rename that ini file and start again.
Posted by: @pe_martinI have the problem that the Program i have write at the fsuipc.ini File did Not start?
When did the programs start?
When i close fsuipc and start it again then the Programs from fsuipc.ini will start correct.
If a program in your [Programs section is not starting, check the FSUIPC7.log file for any errors - you can also attach your log file here (together with a corrected ini file).