Export Configuration

Of your 4 devices, 3 of them have the same GUIDs so there is no issue. The only problem is with your 'Flight Yoke System' which is not detected - are you still using this? If not, you should remove / delete all entries associated with this device.

Also, you are using version 7.5.5. The latest and only supported version is 7.5.6, so please update.

There were some strange errors in one log file:

377282 [ERROR]: Error: CDA with id=0 not found

Not sure why you got those, but I can look into that if they persist after you update.

Also, please update the aircraft names in your profiles to use substring matching. i.e. change

[Profile.PDMG 737NG]
1=PMDG 737-800 Air Europa Express (EC-MPG | 2019)
2=PMDG 737-800 AirEuropa Express (EC-OBO - 2023)
3=PMDG 737-800 Air Europa (EC-MPS | 2017)
4=PMDG 737-800 Air Europa (EC-MPS | 2017)
5=PMDG 737-800 AirEuropa (EC-MPS | 2017)

to

[Profile.PDMG 737NG]
1=PMDG 737-800

You also have one duff assignment that needs correcting:

3=UA,5,C0,0 -{Custom control: <0>}-

But that is on your 'Flight Yoke System' so not sure if that needs correcting or removed completely (if no longer using this device).

Cheers,

John

Thanks John for your kind help :-). I'm still using the same yoke, throttles and rudders. Maybe I will have to remove them and install them again. I'll modify all the parameters you share and I'll let you know if it works. Thanks!!

Posted by: @malrov

↑

I'm still using the same yoke, throttles and rudders

Yes, these:

B=TCA Quadrant Boeing 1&2
B.GUID={39574060-F128-11EF-8001-444553540000}
C=TCA YOKE BOEING
C.GUID={39574060-F128-11EF-8002-444553540000}
D=T-Rudder
D.GUID={41A05D10-76A7-11F0-8001-444553540000}

But what is this one:

A=Flight Yoke System << MISSING JOYSTICK >>
A.GUID={674DE930-DE84-11EA-8008-444553540000}

If that is an old entry, you can delete it, but you should also delete all axis and button assignments to that device, i.e. the ones with an 'A' as the second letter after the '=' sign.
Looks like you have already re-assigned most of the assignments on A to C, your TCA YOKE, anyway. I suspect that its the same yoke but the GUID and name has changed at some point over time. If thats the case, you can also keep any assignment and re-enable them by changing the A to a C (but only for the buttons on C that are not already assigned). 

Posted by: @malrov

↑

Maybe I will have to remove them and install them again

Why do this. They should work fine...